金属螺纹修复指南：使用螺纹衬套解决损坏螺纹问题
- 螺栓和部件错位在紧固过程中部件错位会导致螺纹错位或螺栓变形。错位的部件会导致松动的配件，由于振动和扭矩剪切，从而出现损坏的螺纹。
- 硬件不匹配使用螺纹与所放置的孔不匹配的螺栓，或者在公制孔中使用 SAE 尺寸的螺栓，会在扭矩下产生更大的摩擦。由于硬件不匹配导致的螺纹损坏非常常见且容易预防。
- 腐蚀水分、侵蚀和环境会导致紧固件和螺栓腐蚀。修复由腐蚀导致的损坏螺纹可能比其他原因更耗时。修复腐蚀部件中的损坏螺纹应在专家技术人员的监督下谨慎进行。
- 测量孔使用螺纹衬套修复损坏的螺纹需要你清理孔并测量，以确定是否需要钻新的引导孔。
- 钻孔和攻丝使用螺纹衬套修复损坏的螺纹需要一个略大的孔，以便必要的硬件能够组合在一起。钻孔以分解旧的、磨损的螺纹，然后攻丝以安装全新的螺纹。
- 放置衬套使用可选的驱动工具，你可以轻松地将衬套放入攻好丝的孔中，为你的硬件创建一个牢固的紧固。金属衬套将利用标准外径螺纹提供卓越的锚固。
- 重新插入新硬件修复损坏的螺纹后，使用新的硬件进行紧固，以确保卓越的握紧强度。
Disclaimer: The content of this website may contain the trade names or trademarks of various third parties. The use of any trade name or trademark on our website is for identification and reference purposes only and does not imply any association with the trademark holder or their brands, products, or services. The trademarks™ or registered® trademarks of third parties are the property of their respective holders. We are not affiliated with, authorized by, endorsed by, or connected to these trademark holders. These trademark holders do not sponsor or endorse us or any of our products and services. We declare no affiliation, sponsorship, nor any partnerships with any of these trademark holders. ezlok.cn is also not their authorized agent or distributor.
We are not the official website of E-Z LOK. Leveraging our supply chain strengths, we are committed to introducing E-Z LOK brand thread inserts into the Chinese market from the United States. We promise that all E-Z LOK thread inserts we provide are genuine and ensure that all products come from E-Z LOK's official authorized distributors in the United States.
